产品介绍
	Description: Millipak-200 Filter Unit 0.22 µm Gamma Compatible 1/4 in. NPTM
	Trade Name: Millipak
	Qty/Pk: 3
	Key Applications: Laboratory Filtration
	Outlet Connection Diameter (in): 1/4
	Inlet Connection Diameter (in): 1/4
	Outlet Connection: NPT
	Maximum Inlet Pressure, bar (psi): 5.2 (75) @ 25 °C
	Maximum Differential Pressure, bar (psid): Forward: 4.1 (60) @ 25 °C; 1.7 (25) @ 80 °C; 0.35 (5) @ 123 °C. Reverse: 0.7 (10) @ 25 °C
	Diameter, cm (in): 7.6 (3.0)
	Inlet Connection: NPT
	Oxidizable Substances: Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL
	Bubble Point at 23 °C: ≥3450 mbar (50 psig) air with water
	Process Volume, L: 100
	Pore Size (µm): 0.22
	Wettability: Hydrophilic
	Sterilization: 3 autoclave cycles of 90 min @ 123 °C; capable of 45 kilogray (4.5 Megarad) gamma exposure; not in-line steam sterilizable
	Good Manufacturing Practices: This product was manufactured in a facility which adheres to Good Manufacturing Practices.
	Vent Cap Material: PVDF
	Bacterial Retention: Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
	Gravimetric Extractables: The extractables level was equal to or less than 5 mg per device after 24 hours in water at controlled room temperature.
	Product Name: Millipak-200 Filter Unit
	Non-Fiber Releasing: This product was manufactured with a Durapore membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
	Filtration Area, cm²: 1000
	Sterility: Non-Sterile
	Bacterial Endotoxins: Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
	Device Material: Polycarbonate
	Connections, Inlet/Outlet: 6 mm (1/4 in.) NPTM
	Length, cm (in): 13.0 (5.1)
	Capsule Type: Liquid
	Configuration: Stack Disk
	Chemistry: Hydrophilic PVDF
	Media: Durapore®
	Flow Rate, L/min: 18 @ 3.0 bar ΔP
	Support Material: Polycarbonate
	Packaging: Double Easy-Open bag
	 
	 
	技术指标
	 
	
		
			| 
				 
					结构材质 
			 | 
		
		
			| 
				 
					外壳 
			 | 
			
				 
					聚碳酸酯 
			 | 
		
		
			| 
				
			 | 
			
				 
					Hydrophilic PVDF 
			 | 
		
		
			| 
				 
					接口 
			 | 
		
		
			| 
				 
					进出口 
			 | 
			
				 
					6 mm (1/4 in.) 带钟罩的倒刺软管接口 
			 | 
		
		
			| 
				 
					最大进口压力,bar (psi) 
			 | 
			
				 
					25 °C 时的压力为 5.2 (75) 
			 |